SeaMonkey 2.53.10

You MUST absolutely do a full backup of your profile before upgrading from a version earlier than SeaMonkey 2.53.1. This version of SeaMonkey makes changes to your profile that can't be reverted in cases where you need to go back to the older version.

Automatic upgrades from previous 2.53.x versions are enabled for this release.

The Mozilla backend code SeaMonkey is based on, now usually incorporates breaking changes in every release. This is especially true for the Mozilla Gecko add-ons code and the JavaScript interpreter. Consequently, some older extensions may no longer function properly. If you experience any problems please refer to the troubleshooting section first. Especially try to disable extensions first and check if this makes a difference.
Important only if you upgrade from 2.49.5 or an earlier version: Due to changes in the user profile, if you have set a master password, you will have to remove it before upgrading to SeaMonkey 2.53.10. After a successful upgrade, don't forget to manually remove the files key3.db and cert8.db in your profile afterwards, as they include credentials and passwords no longer protected by a master password. You can find the path to your profile folder entering the special about:support URL in a SeaMonkey browser window.
You can remove your master password by providing an empty password in the "Change Master Password" dialog. Do not use the "Reset Password" function. You will lose all stored passwords this way.
If you have a SeaMonkey 2.53.1 or 2.53.2 language pack installed you need to remove it before upgrading to this version. These language pack versions were marked to be compatible with all SeaMonkey 2.53.x releases and cause breakage when used with a different version. You can then install one of the provided 2.53.10 language packs from the download section after installation of the base product.

For SeaMonkey 2.53.10, the following extensions are included.

  • ChatZilla
  • DOM Inspector
  • Lightning
Beta versions also contain the following extension.
  • SeaMonkey Debug and QA UI

These release notes describe system requirements, installation instructions, and known issues for SeaMonkey 2.53.10 up to/including SeaMonkey 2.53.10. These notes are updated when we receive feedback, so please check back for new information.

What's New in SeaMonkey 2.53.10

SeaMonkey 2.53.10 contains (among other changes) the following major changes relative to SeaMonkey 2.53.9.1:

  • Minor fixes for testdisplay command in ChatZilla bug 1727976.
  • Show CTCP requests (excluding ACTION and DCC) bug 1722156.
  • IRCv3: Add support for server-time bug 1724586.
  • Add localization note for network editor dialog width in ChatZilla bug 1727977.
  • IRCv3: Add support for extended-join and account-notify bug 1722159.
  • Add ability to collapse message groups in ChatZilla bug 1724588.
  • Fix JS strict warnings in unescapeTagValue in ChatZilla bug 1727989.
  • IRCv3: Add support for invite-notify bug 1722161.
  • IRCv3: Add support for batch bug 1724589.
  • Fix JS strict warning in addHistory in cZ static.js bug 1727992.
  • IRCv3: Add support for cap-notify bug 1722162.
  • Stop using canonical name as collection keys in ChatZilla bug 1728025.
  • IRCv3: Add support for TLS and STS bug 1722166.
  • Helper function for renaming irc server properties in ChatZilla bug 1728027.
  • IRCv3: Add support for MONITOR bug 1722174.
  • Remove use of msg.commasp in ChatZilla bug 1726965.
  • Allow shiftKey to modify behaviour of link clicking in cZ bug 1713458.
  • IRCv3: Add support for echo-message bug 1722211.
  • In ChatZilla make /commands return all matches starting with pattern bug 1726966.
  • Use SeaMonkey prefs to determine how links behave in cZ bug 1713467.
  • Allow parameters to be localised in ChatZilla bug 1724105.
  • Add identify command to cZ and hook into password management bug 1713470.
  • IRCv3.1: Implement SASL with PLAIN mechanism bug 1717545.
  • IRCv3: Add support for message tags bug 1724584.
  • Add last read message divider to ChatZilla bug 1729159.
  • IRCv3: Add support for account-tag bug 1724585.
  • Missing option "text encoding Unicode/UTF-8" in preferences - Mailnews bug 1679260.
  • Detect Crashreporter using AppConstants in SeaMonkey bug 1735236.
  • Link about LEGACY extensions in Add-ons Manager is broken bug 1656797.
  • Update help for clear private data preferences and dialog bug 1728911.
  • Fix typo in cs_nav_prefs_appearance bug 1737473.
  • Drop leftover "Edit Menu" comment from messageWindow.xul and addressbook.xul bug 1725121.
  • Add dummy tab routines to SeaMonkey mailnews tab browser bug 1735243.
  • Folder pane and tab/window title not updated correctly when opening in new tab bug 1726940.
  • Allow mail tab bar to be controlled separately to browser tab bar bug 1724515.
  • Copy any user set values for new mail.tabs prefs bug 1729165.
  • Merge Master Passwords and Passwords pref panes into a single pref pane bug 1728099.
  • Move warning about redirection pref from Content to Privacy & Security pane bug 1728185.
  • Move website icons prefs from content pref pane to browser pref pane bug 1727425.
  • Move browser / mailnews system integration prefs into advanced pane bug 1727659.
  • Have separate opentabfor.middleclick for mailnews bug 1727948.
  • Add removeBrowser helper for tabbrowser bug 1730391.
  • Put <browser> in a <stack> so it's easy to overlay bug 1730392.
  • Allow browser focus to be avoided bug 1720003.
  • SeaMonkey 32x32 default icon has light stripe at the bottom bug 1729153.
  • Support <input type=time> and <input type=date> in SeaMonkey bug 1730408.
  • Middleclick on browser tab handled twice (closes tab and loads URL from primary or clipboard) bug 1734407.
  • Unable to create a new "Saved Search Folder" using "Save View as a Folder..." bug 1738669.

The following bugs were fixed in our branch of the Gecko source code only:

  • Enable compression for standard http connections bug 1728996.
  • Support VS2022 for compiling under Windows bug 1728988.

SeaMonkey 2.53.10 contains (among other changes) the following major changes relative to SeaMonkey 2.49.5:

  • The Bookmarks Manager has switched its name to Library, and now also includes the History list. When History is invoked, the Library will be shown with the History list selected. The extensive modifications were needed because of Mozilla Gecko platform API changes.
  • Download Manager has been migrated to a new API. Although it looks pretty much the same as before, the search option is missing and some other minor details work differently. The previous downloads history is removed during the upgrade.
  • The layout panel was added to the CSS Grid tools.
  • TLS 1.3 is the default SSL version now.
  • Support for all NPAPI plugins like Flash, Java and Silverlight has been removed. For displaying pdf files in the browser you can use pdf.js-seamonkey from Isaac Schemm.
  • SeaMonkey now uses a new api for formatting regional data like time and date. Default is to use the application locale of the current SeaMonkey build. If you use a language pack or a different OS formatting this is usually not desired. You can change the formatting from the application locale to the regional settings locale (OS) in the preferences dialog under "Appearance".

SeaMonkey 2.53.10 uses the same backend as Firefox and contains the relevant Firefox 60.8 security fixes.

SeaMonkey 2.53.10 shares most parts of the mail and news code with Thunderbird. Please read the Thunderbird 60.0 release notes for specific changes and security fixes in this release.

Additional important security fixes up to Current Firefox 78.15 ESR and a few enhancements have been backported. We will continue to enhance SeaMonkey security in subsequent 2.53.x beta and release versions as fast as we are able to.

SeaMonkey-specific changes

  • SeaMonkey now uses gtk3 on Linux. If you experience a problem because of this please file a bug and link it to bug 1367257. Please try another OS theme first. Some of them are buggy and cause problems with SeaMonkey, Thunderbird and Firefox.

Downloading

The SeaMonkey project provides official versions and language packs of SeaMonkey 2.53.10 for Windows, Linux and macOS in US English and a small variety of other languages. Community volunteers are also contributing builds for other platforms. You can download SeaMonkey 2.53.10 here.

System Requirements, Installation and Uninstallation

Before installing, make sure your computer meets the system requirements.
Please note that the new Windows x64 version will only support Windows 7 x64 and up. You need to uninstall a previous Windows x86 version if you want to use it. Installing the x64 over the old x86 is not supported and does not remove the old version which might cause problems later.
SeaMonkey 2.53.10 will no longer offer to migrate your data from SeaMonkey 1.x or Mozilla 1.x at the first start after installation (bug 689437). In order to upgrade from such an old version, install the last SeaMonkey 2.0 release first, do the one-time profile upgrade, uninstall SeaMonkey 2.0 and then install your target release (e.g. this one).
If you are on an older release we suggest upgrading to SeaMonkey 2.49.5 first.
You can find more details about installation, profile data and uninstallation in our install and uninstall document.

Extensions (Add-ons) and Themes

Extensions and Themes for SeaMonkey 2.53.10 can be installed from the SeaMonkey Add-Ons website or the "Get Add-Ons" section in the Add-ons Manager.

Extensions with binary components such as Enigmail only work for the specific platform they are released (e.g. win extension for Windows, linux64 for Linux 64 bits). Besides, matching version of extensions for SeaMonkey may not be the latest available of those versions. Therefore, they need to be adjusted for each new SeaMonkey release, which also means that an old version of such an add-on can break SeaMonkey if you disabled compatibility checking (which e.g. happens when you install the Add-on Compatibility Reporter add-on). Please, note the following warnings and advice regarding extensions:

  • Previous versions supported a proprietary JavaScript try/catch solution. This was removed in bug 1228841 and needed to be backported to 2.53.10b1. The backport might break some add-ons. One add-on affected is the classic version of DownloadThemAll. Please ask in the support groups if a new version is already available.
  • For Enigmail, please refer to the Enigmail page.
    The latest supported version is 2.0.9 Enigmail but there have been some problems reported against it.
  • Adblock Plus 2.9.1 may cause huge memory and CPU consumption and is not recommended or officially supported in this SeaMonkey version. Consider switching to uBlock.
  • Lightbird 0.7.1. is not compatible with this version. The message preview pane will not update itself correctly.
  • The latest 1.16.x working version of uBlock can be found here. Please install the latest legacy version.
  • The latest working version of NoScript Classic 5.x can be found here.
  • Dictionaries in WebExtension formats do not work, even though they appear to install correctly. Support for them will be added at a later date. Please install the latest classic version from the dictionary history or unpack the dictionary inside the WebExtension package into your /dictionaries directory.
  • Lightweight themes are no longer provided on the SeaMonkey Add-ons site.
  • Full theme add-ons may need changes because of user interface and internal changes. If you find any problem with themes, contact the theme author. Before reporting a problem with the user interface please make sure to recreate it with either the Classic or Modern theme.
  • Because of security backports which removed obsolete code, Session Manager add-on version 0.8.1.14 or above is required to be compatible with current and future 2.53 releases.

Known Issues

This list covers some of the known problems with SeaMonkey 2.53.10. Please read this before reporting any new bugs.
  • Some translations are missing in a few languages in the user interface and are being substituted with the corresponding US English terms. We plan to update the l10n translations for the final version but some languages like Polish are now missing a translator. Consider helping out with translations if you would like to have a 100% translated version.
  • Opening single new tabs from the Library always loads them in the foreground. The problem is tracked in bug 1619108
  • SeaMonkey will not start under Linux if you downloaded the wrong package.
    We are providing x86 and x64 versions of SeaMonkey for Linux. For newer distributions you probably need the Linux x64 version.
  • Lightning or one of the distributed extensions is disabled under Add-ons.
    Starting with SeaMonkey 2.53.7b1 the distributed extensions can no longer be removed. If you have previously enabled one then under some circumstance it might be disabled during the upgrade process. If the extension is disabled and can not be enabled then it is because an old or incompatible version is still present in your profile.
    To clean out old versions use the following instructions:
    • Enter "about:config" in the location bar.
    • Enter "extensions.installedDistroAddon" in the search field.
    • Reset (delete) all keys found.
    • Open the Add-ons Manager. If the "remove" button is shown for the disabled extension use it. Stored data like your personal calendars will not be removed by this action.
    • Restart SeaMonkey.
    • Disable any distributed extension you do not wish to use.
  • Unable to connect to secure sites and a certificate error is shown.
    In 99% of all cases this issue is caused by the same problem. Your antivirus software or custom firewall acts as a man in the middle and intercepts secure https traffic. In order to intercept and scan this encrypted network traffic, it normally uses a vendor specific certificate which is not installed by default in SeaMonkey by the third party software installer. If you want to keep this feature working you need to install one or more certificate(s) from the antivirus software in SeaMonkey. You need to ask your antivirus software vendor where they are located. Consult the SeaMonkey online help to find out how you can import and manage certificates.
  • If you experience a hang and/or get a message box warning that a script is busy when opening the Data Manager try deleting the webappsstore.* files from your profile folder when SeaMonkey is not running. These files contain data stored by websites and will be recreated during the next start. If you are unsure if the information is needed please back up the files before deleting them. The problem is tracked in bug 1305624 but so far no coding error has been found. This problem has been reported frequently when trying to manage passwords. But the problem will generally happen just after you open the Data Manager, because this component is also used for managing cookies, site preferences permissions and other settings.
  • If you are running Windows 7 "Send to > Mail recipient" might not work. More information can be found in bug 1356902. As a workaround install the "Microsoft Visual Studio 2015 to 2019" redistributable runtime library. For x86 install the VS2019 x86 runtime.
    If you are using the x64 build install the VS2019 x64 runtime. SeaMonkey was built using the latest VS2019 compiler so make sure to upgrade any older VS2017 runtime.
  • If you experience a delay showing the first page after start, please delete the Safebrowsing folder in your profile. Bad Safebrowsing data may delay showing the first page for up to 30 seconds. The problem is tracked in bug 1432274. This can occur even if you are not using Safebrowsing because the lists are always fetched.
  • SeaMonkey does not currently support the WebExtensions add-on api. Some popular add-ons like NoScript and uBlock Origin are no longer shown because of this on the SeaMonkey add-ons website. You can usually get compatible versions from the manufacturers site. WebExtensions support is a planned feature for 2.57. For dictionaries please install the latest non webext version.
  • The SSL 3.0 encryption protocol is no longer supported due to security concerns (bug 1106470). Legacy websites may still rely on it and will not work with the newer TLS 1.x protocols. Contact the website administrator to update their server to resolve the issue at the source.
  • The Remember Passwords add-on breaks password handling. Please disable or uninstall this add-on using the Add-ons Manager.
  • You cannot set up a new Sync account or pair a device anymore (bug 998807).
  • Data loss warning: If you use a profile with this or any later version and then try to go back to SeaMonkey 2.49.5 or earlier, SeaMonkey will rename your bookmarks and history file to places.sqlite.corrupt and create a new places.sqlite file, effectively resetting your browsing history. This is because the internal format changed and the upgrade process only works in one direction. Additionally, running MailNews with local folders and POP3 mail filters may produce summary files that are not correctly read by previous versions of SeaMonkey. If you decide to go back to a previous version of SeaMonkey, you should do it from a profile backup only. Stored passwords and local storage will also be unavailable in the old version.
  • After creating a news account through clicking a news URL, the MailNews account wizard may be broken (the account type will always be News). To work around the problem, set the mail.server.serverX.valid pref (where X is the internal number of the corresponding news account) to true in about:config, or delete the invalid news account (bug 521861).
  • WebRTC has been disabled by default. It needs an add-on to enable it per site. See the webrtc-permissions-ui-toggle add-on.
  • Web pages may appear differently in the MailNews feed reader than in the browser (bug 662907). Workaround: Add a "noscript {display:none}" rule to your userContent.css (note that the Stylish add-on cannot be used here since it does not integrate with the MailNews feed reader).
  • Lightning keyboard shortcuts for accessing the calendar tab from within the MailNews window or from the main menu (Ctrl+Shift+C/D) do not work. (bug 514512).
  • If you try to start SeaMonkey using a locked profile, it will crash (see bug 573369).
  • In ChatZilla users are unable to add an exception for an invalid certificate unless an override is added to the preferences (see bug 1738597).
  • Linux:
    • SeaMonkey 2.53.7b1 can not be automatically updated to later beta versions as it is set to the wrong update channel. To overcome this, make sure SeaMonkey 2.53.7b1 is not running, edit the channel-prefs.js file located in the defaults/pref directory of the installation directory for SeaMonkey 2.53.7b1 and change the app.update.channel pref from "release" to "beta". When SeaMonkey is restarted it should then find future beta releases.
  • Windows:
    • You might not be able to install SeaMonkey in Windows 10 if you have turned on the Windows Defender Smartscreen feature. Your SeaMonkey download will be blocked in the case. To overcome this go to "Windows Security->App & browser control" in the new Windows Settings and set the "Check apps and files" setting to Warn from Block.
    • Antivirus scanners may report that some parts of SeaMonkey (e.g. the file freebl3.dll) are suspicious. If you downloaded SeaMonkey from one of the official download sites, this is a false alarm. You might experience problems with secure websites when this happens. To fix the issue, instruct your antivirus software to ignore these files (and move them out of quarantine) and/or switch to another antivirus software and reinstall SeaMonkey.
  • Mac:
    • The scrollbar is not always visible on some websites under recent macOS versions (10.15 upwards) see bug 1684651.
    • You might not be able to install SeaMonkey under recent macOS versions. In this case please read Open a Mac app from an unidentified developer for a solution.
    • When hardware acceleration is off, background colors in the UI (toolbar, status bar etc.) might not update correctly when you switch focus from/to a window. Users running Macs with certain older hardware will experience this even if they haven't turned off hardware acceleration in Preferences (Appearance/Content) (bug 626096).
    • SeaMonkey 2.53.7b1 can not be automatically updated to later beta versions as it is set to the wrong update channel. To overcome this, make sure SeaMonkey 2.53.7b1 is not running, edit the channel-prefs.js file located in the Contents/Resources/defaults/pref folder of the installation folder for SeaMonkey 2.53.7b1 and change the app.update.channel pref from "release" to "beta". When SeaMonkey is restarted it should then find future beta releases.

Troubleshooting

  • Some questions are asked more frequently than others. Have a look at the SeaMonkey FAQ. Maybe your particular problem has already been solved.
  • Some antivirus software keeps detecting our installers as containing a "Trojan" or "Downloader". This is a false positive because of some wrong detection mechanism in the antivirus software. The code in question is actually from 7-Zip and decompresses the installer so that its contents can run and install SeaMonkey. That technology is widely used and probably can be used to compress bad as well as good software, but the 7-Zip code itself is perfectly safe. Mozilla scans all our files routinely when putting them on the FTP server and we assure you that our installers are as clean as the official Firefox downloads that are scanned by the same mechanisms.
  • For security, parts of bug 1035091 were ported in bug 1411708. This might cause problems with add-ons like Stylish which use moz-document. Set the preference "layout.css.moz-document.content.enabled" to "true" to overcome this but be aware that this disables the added security fix.
  • Poorly designed or incompatible extensions can cause problems with SeaMonkey, including make it crash, slow down page display, etc. If you encounter strange problems relating to parts of SeaMonkey no longer working, the browser not starting, windows with strange or distorted appearance, degraded performance, etc, you may be suffering from Extension or Theme trouble. Restart SeaMonkey in Safe Mode. On Windows, start using the "Safe Mode" shortcut created in your Start menu or by running seamonkey.exe -safe-mode. On Linux, start with /path-to-seamonkey/seamonkey -safe-mode or first change to the SeaMonkey installation directory and start with ./seamonkey -safe-mode, and on macOS, run:

    cd /Applications/SeaMonkey.app/Contents/MacOS/
    ./seamonkey-bin -safe-mode

    When started in Safe Mode all extensions are disabled and the Default theme is used. Disable the Extension/Theme that is causing trouble and then start normally.
  • If you uninstall an extension that is installed with your user profile (i.e. you installed it from a Web page) and then wish to install it for all user profiles using the -install-global-extension command line flag, you must restart SeaMonkey once to cleanse the profile extensions datasource of traces of that extension before installing with the switch. If you do not do this you may end up with a jammed entry in the Extensions list and will be unable to install the extension globally.
  • If you encounter strange problems relating to bookmarks, downloads, window placement, toolbars, history, or other settings, it is recommended that you try creating a new profile and attempting to reproduce the problem before filing bugs. Create a new profile by running SeaMonkey with the -P command line argument, choose the "Manage Profiles" button and then choose "Create Profile...". Migrate your settings files (Bookmarks, Saved Passwords, etc) over one by one, checking each time to see if the problems resurface. If you do find a particular profile data file is causing a problem, file a bug and attach the file.

Frequently Asked Questions

What can I do to help?
We need help from developers and the testing community to provide as much feedback as possible to make SeaMonkey even better. Please read these notes and the Bug Writing Guidelines before reporting any bugs to Bugzilla.
Why haven't you responded to the mail I sent you?
Use the alt.comp.software.seamonkey newsgroup or the SeaMonkey forums on mozillaZine. The SeaMonkey team read them regularly, and your email may have gotten lost.
Where can I get extensions and themes (add-ons)?
Extensions and Themes can be downloaded from SeaMonkey Add-ons.
Who makes SeaMonkey?
Lots of people. See Help->About SeaMonkey, contributors for a list of some of the people who have contributed to Mozilla and SeaMonkey.
Where's the SeaMonkey 2.53.10 source code?
A tarball of the SeaMonkey 2.53.10 source code is available at the download page. The latest development code can be obtained from the source repository. SeaMonkey-specific source is in the "suite" directory. Please follow the build instructions. We provide source code for 2.53.1 and future releases on gitlab. For accessing the site you currently need to use the web components polyfill add-on.
Can I remove the tool- and menubar grippies?
You can remove the tool- and menubar grippies by setting the preference "browser.toolbars.grippyhidden" to "true".

Other Resources and Links

The following resources contain useful information about SeaMonkey 2.53.10: